Call forward limitation

[SLBPBXGUY]

Hi, I have a M3904 phone forwarded to an external number. If there is an active call that is in turn forwarded, the next caller receives a busy signal if the first call is active. Is this a limitation or is there something that I can change?

 

[bigindian65]

3 hops forward but may not be your problem post TNB and remember forward is no answer Busy gets HUNT treatment, are FDN and HUNT the same?



Mato' Was'aka

 

[GHTROUT]

The reason the caller hears busy is because the external number is busy, talking to the first call.





[©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators

 

[SLBPBXGUY]

Its forwarded locally on the phone to an external number. I have CFXA programmed on it. the forwarding works on the first call, however if that call is still active, any other calls to the DN will get a busy

 

[GHTROUT]

I know, that's why the caller is getting busy. The place the phone is forwarded to is busy.

What you would like to occur?

PS: This describes the sounds

Normal Busy is ---- ---- ---- ----
Fast Busy is -- -- -- -- -- -- --

Which one are you hearing?

[©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators