Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Call Forward External 500 set

Status
Not open for further replies.

km9v

MIS
Jan 11, 2011
116
US
How do I do this? I have a health clinic that need to call forward their fax to a 3rd party for medical record keeping. I have call forward external enabled on the set. The only command I've found to do this is #1 & all I get is a fast busy. I call forward external from my digital & VoIP set w/o issue.

REQ: prt
TYPE: tnb
TN 16 0 4 1
DATE
PAGE
DES

DES A21014
TN 016 0 04 01 VIRTUAL
TYPE 500
CDEN 4D
CUST 0
MRT
ERL 00000
WRLS NO
DN 2352 91 MARP
CPND
NAME Nurses Fax
XPLN 27
DISPLAY_FMT FIRST,LAST
AST NO
IAPG 0
HUNT
TGAR 1
LDN NO
NCOS 5
SGRP 0
RNPG 0
LNRS 16
XLST
SCI 0
CLS CTD DTN FBD XFD WTA THFD FND HTD ONS
LPR XRD AGRD CWD SWD MWD RMMD LPD XHD SLKD CCSD LNA TVD
CFTD SFD MRD C6D CNID CLBD AUTU
ICDD CDMD LLCN EHTD MCTD
GPUA DPUA CFXA ARHD OVDD AGTD CLTD LDTD ASCD SDND
MBXD CPFA CPTA DDGA NAMA MIND
MCRD
EXR0 SHL ABDD CFHD DNDY DNO3
CWND USMD USRD BNRD RTDD RBDD RBHD FAXA CNUD CNAD PGND FTTC
CDMR PRED MCDD T87D SBMD PKCH MPTA ELCD
PLEV 02
PUID
UPWD
AACS NO
MLWU_LANG 0
 
> LD 20
REQ CHG
TYPE 500
TN (TN of Set)
ECHG Yes
ITEM FTR CFW X (X = Maximum number of digits allowed to call forward to)


Calum M
ACSS
 
Hi CMUK,

Please look into below queries and help on this

Query 1 -
SYSTEM WE have - Nortel CS1K (CS1000)
I have 10 extensions (1150 and 1140 Phones), when making outgoing calls , I want one unique number should display at Customer end.
For example, I have extensions 2417 , 2424 etc. When I am calling from 2417 , customers getting number 2200-2417 (Pilot no. +Extension). I want to configure when I make any outgoing call from any extension , one number (2200-1514) should display.
Please advise how can I achieve this.

Query - 2 -
How to enable all call forward from 1140 & 1150 phones to internal or external number
 
Don't see how a TSP (BRI) CLID entry will help 1140/50 sets, you must know something I don't!!!

Remember if it doesn't work hit it harder

Scott UK
 
Avaya Naresh, try referring back to your original thread (thread798-1783913) for responses as your not going to get much follow up in somebody else's question.

Remember if it doesn't work hit it harder

Scott UK
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top