call forward a 500 in programming?

[Trason]

i know you can forward a 500 using #1. and you can make a phantom loop and program it to call forward. can you forward a 500 just through programming? or do you have to do it on an actual phone? we have a remote site and they need a 500 fax forwarded to another line.

 

[bdmcdonald99]

You can use a DISA trunk if you have one, to CFW a local with an access code. There is no way to program a call forward for a phone remotely.

It's a phone system, NOT a clock!

 

[GHTROUT]

Remote Call Forward: [URL unfurl="true"]http://www.ghtrout.com/rdr/rcf.html[/url]

Find more at GHTROUT.com

 

[Trason]

i figured so. i just got the guy over there to plug in an analog phone and forward the line. just seems like this is should be simple to do in programming. i mean you can make almost any other change. i guess nothing beats boots on the ground (as it should be)

 

[Firebird Scrambler]

You can use remote call forward for any set. Use FFC RCFA

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[juanga]

go to ld 20
chg (tn number of station you have to put fwd)
ftr fdn (trunk access more telephone number you want to forwarded)
example: ftr fdn 908094508127

 

[bdmcdonald99]

GHTROUT is right on that remote call forward can be used from any set INTERNALLY. To CFW from OUTSIDE the PBX you need to use a DISA trunk. The change discribed by Juanga is changing the FDN (Forward no answer) not Call Forward All Calls. Thanks

It's a phone system, NOT a clock!