Call forward 500 port? 1

[TommyT1]

Can someone remind me how to call forward a 500 port? There's some sequence of numbers that you input when you go off-hook, but I can't remember.

BTW, it's an Option 61C.

Thank you.

Tommy

 

[hawks]

It's either #1 plus number or 1# plus number

 

[TommyT1]

I tried that, but get a fast busy.

 

[ssinger1]

Check your cls for that DN. You are missing the class that allows you to forward all calls. Sorry I am unable to remember what the CLS is for that. Once you figure that out the #1 plus the number will work.

If I don't see that you have fixed it.
I will copy the CLS of one of my 500 ports when I get into work on Tuesday.

Good luck.
Steve

 

[cmawbey]

try adding FTR CFW X... x= max number of digits ( mine is set to 16 )

Colin

 

[TommyT1]

Colin -

That worked, man. Thanks!

I tried changing all kinds of things in the CLS, that I thought would be associated, and I couldn't get it to work. LOL

Now that I have that forwarding set, how would I go about taking it off?

Thank you all again.

-Tommy

 

[suebee9]

I believe to remove forward #1 and hang up.

 

[GIXXER750]

Suebee9 is right, press #1 and and listen for dial tone. This should unforward the circuit.