CALL FORCE TONE on a CPPM call server rel 5.50

[burak28]

Is it possible to change the "Call Force Tone" on a CS1000E rel 5.50 (CPPM Call server)?

LD 56 - ACFT prompt.

It is possible to change this ACFT prompt on a CS1000M multi group rel 5.50 and on a CS1000E rel 6 (beta trial).

If I try to change this on the CPPM rel 5.50 it is not possible.
The ACFT prompt is skipped.

LD 56
REQ CHG
TYPE FTC
TABL 1
RING
HCCT YES
DIAL
SPCL
CDT
CFDT
MWDT
CFMW
BUSY
RGBK
ARBK
FFCT
ACTN
HOWL
LIMT
NRMT
AWUT
OVFL
TEST
ERWT
ACFT
TLP
TLPT *******

 

[SpelingChampeon]

I read the docs on this, and apparently it is handled in (2) places.. the TRUNK ROUTE - TTBL in LD 16, and in LD56. I went to LD 56 on my machine here (CS1000E rls 5.5) and was able to get to AFCT and got the promot 'xton'. There was a difference from what I had, and your post. I do not have a TABLE 1, I only have TABLE 0 to change.

If you can get to the AFCT prompt, have you tried 'chg' or 'yes' to see if you can drill down a level?

 

[burak28]

MPLR 26722 fixed the problem .

Thanks