Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Call flows in Nupoint

Status
Not open for further replies.

thesiscokid

Technical User
Aug 12, 2011
16
GB
Hi there,

I am using some call flows in Nupoint, the options point to ACD paths with ACD groups which all works very well. The only problem I have is that I have set the interflow dialling list to dial back into the Nupoint to the mailbox of the Path. So in my senario I have a path of 8401 with an interflow dialling list of 7000 (HG of VM ports). I just get 'please wait while I transfer your call'. It works if I divert it to the embedded VM

I suspect that either the issue is that it is just bouncing or that I am missing a Feature COS on the Nupoint. I have tried creating a NT HG which is forwarded always to the path and then created a mailbox of that number but that isnt working either.

Thanks in advance.

Ant
 
Dont worry I cracked it

Needed to create a line key and forward that always to VM then use the interflow dialling list to that number
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top