Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

c4000-is-mz.12.1

Status
Not open for further replies.

victorjob

Technical User
Apr 27, 2003
33
HK
Where can I download the
c4000-is-mz.12.1?
As my IOS was corrupted!

Thank you

victorjob@mail.hongkong.com
 
Do you have a copy of the IOS on your network? Or do you have a support contract with Cisco? If so you can go to CCO and download it from the software center. Failing ether of these you might have to buy an IOS from a retailer. Good luck
 
Could the Cisco 4000 upgrade to c4000-is-mz.12.1?
What series about it? 4000 or 4000-M?
(68030) processor = 30Hz CPU?
Does it support ADSL?

Thank you for your helping!


Cisco Internetwork Operating System Software
IOS (tm) 4000 Software (XX-J-M), Version 11.1(12), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1997 by cisco Systems, Inc.
Compiled Mon 02-Jun-97 16:07 by dschwart
Image text-base: 0x00012000, data-base: 0x0066CC90

cisco 4000 (68030) processor (revision 0xB0) with 16384K/4096K bytes of memory.
Processor board ID 5019860
G.703/E1 software, Version 1.0.
Bridging software.
SuperLAT software copyright 1990 by Meridian Technology Corp).
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
TN3270 Emulation software (copyright 1994 by TGV Inc).
3 Ethernet/IEEE 802.3 interfaces.
1 FDDI network interface.
128K bytes of non-volatile configuration memory.
4096K bytes of processor board System flash (Read/Write)

SETUP: new interface Ethernet1 placed in "shutdown" state
SETUP: new interface Ethernet2 placed in "shutdown" state


Press RETURN to get started!

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top