Button placement on 9611 phones - page 1 vs. page 2

[Voice99]

Hi, has anyone noticed that on the 9611 phone you can build 3 key appearances on page 1 (or screen 1) but you can't add feature buttons? We added the call forward button to key 4 but it doesn't show up on page 1 (or screen 1), we have to scroll to the right one time to see it on page 2. Weird and causes more work.

What causes this limitation? Is it something on the station form or something inherent to the 9611 programming.

 

[gwebster]

## PHNSCRALL specifies whether separate screens will be displayed for call appearances and features.
## Value Operation
## 0 Separate screens will be displayed for call appearances and features (default)
## 1 A consolidated screen will be displayed that includes call appearances and features
## This parameter is supported by:
## 96x1 H.323 R6.0 and later
## SET PHNSCRALL 1
##
##
## FBONCASCREEN specifies whether features will be displayed on the same screen as call appearances
## when the value of PHNSCRALL is 0.
## Value Operation
## 0 Features will not be displayed on the same screen as call appearances (default)
## 1 As many features as will fit will be displayed on the same screen as call appearances,
## in addition to being displayed on a separate feature screen.
## This parameter is supported by:
## 96x1 H.323 R6.0 and later
## 96x0 H.323 R3.0 and later
## SET FBONCASCREEN 1
##

 

[Voice99]

Thx gwebster. I found a posting that referenced something similar and was leaning towards the 46xx settings file so I guess I was in the right ballpark.