Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Busyout ds1 2

Status
Not open for further replies.
Nov 22, 2013
600
US
I seem to be having difficulty doing a busyout on a ds1 board.

I have a ds1 located at 005v224
the trunk is 15 and signaling group is 15
I need to change the protocol from B to A to further test.
I did busyout tru 15
and busyout port 005v224

but it still says need to busyout the ds1 when I try to change port 005v224
I tried busyout ds1-facility (but not sure what to put here as 005v224 does not work)

Any suggestions?


 
busy board 5v2
This will drop calls and make trunks unavailable
release board 5v2

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
You can also campon busy out trunk x so you dont just kill any active calls.

APSS (SME)
ACSS (SME)
ACIS (UC)
 

I will kill....or give up all my kids......for a campon-busyout of just a single PRI. I hate having to take down 10 PRIs just to take one out of service. Right now we do it the long way by doing a campon of each specific trunk group channel we want to take out of service. Tedious, very tedious! :(
 
no camp on busy for the 1 trunk group you are tryng to take out of service
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top