Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

busy trunk MD110 BC11

Status
Not open for further replies.

tonfir

Technical User
Apr 9, 2012
11
TR
Hi

could you help me in how can i solve busy trunk
command ROEQE:gives (not accepted trunk is busy)
and the line is not busy



Regards
 
Hi
this is the result

<SUSIP:ROU=2,TRU=2-24;

STATUS INFORMATION AT 11:21:00 19MAY12
ROU TRU TYPE TRAFFIC STATE/PTR LINE STATE/PTR ADD INFO
2 002-24 TL11 NOPROGRESS #0058 BUSY #00F4
END
 
The System thinks it's busy. Have you tried to disconnect the line from the TLU? There could be a fault on the line causing the trunk to hang in this state.

A restart of TLP11 and/or DTR in LIM 2 should release it but this will affect other traffic.
Or you could try-
SGSAI:LIM=2,SIGAR=1,LEVEL=A,UNIT=TLP11,SIGNAM=CRADRRELEASE,STYPE=SWSW,BYTE=0-00&1-58&2-00;
SGSSI:SIGAR=1;
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top