Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Bulk E-mail Help

Status
Not open for further replies.

prasad41us

Programmer
May 27, 2002
2
US
HI

I am sending Bulk E-mails(sending E-mails to all my customers) at one time using OUT LOOK through ACT-2000 software.
i am not able to send E-mails to YAHOO SERVER, it is giving me following error message in the MAILOR DEMON mail.
"
This Message was undeliverable due to the following reason:

Your message was not delivered because the destination computer refused
to accept it (the error message is reproduced below). This type of error
is usually due to a mis-configured account or mail delivery system on the
destination computer; however, it could be caused by your message since
some mail systems refuse messages with invalid header information, or if
they are too large.

Your message was rejected by mx1.mail.yahoo.com for the following reason:

VS10-RT Possible forgery or deactivated due to abuse - see (#5.1.1)

The following recipients did not receive this message"

CAN ANYBODY TELL ME THE SOLUTION

THANKS
 
HI.

You should check that your server is not an "Open Relay" and that it is not listed as one at:

If this is not the problem, then you will probably need to simply send a "normal" email to that recipient, or ask him if he has another email not at Yahoo.

Bye
Yizhar Hurwitz
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top