built in tests for 9940B

[ron54321]

What is the procedure for preparing a new tape to be able to run wr/rd test on the 9940B tape drives from its operator panel. I really need a manual with fsc codes if anyone has them. Also other than STK, Who can do repairs on this drive.

 

[timwah]

You need to preform the "make data tape" function before running the write / read test.
Post any fsc codes and I'll look them up for you.
I've been known to fix some of these units.
Tim

 

[ron54321]

Thanks, That took care of that little problem.

 

[ron54321]

I am at microcode level R1.34.408F and I get Media errors on different tapes. The other drive I have is at R1.35.409F and it runs those same tapes with no errors. I assume I need to load my other drives with the latest Microcode. Can I copy it off the new drive and reload the old one. Or where can I get the new level without going to STK.

 

[timwah]

Send me a note...

estes dot tim at gmail dot com

 

[Chris969404]

Try contacting Pinetree Peripherals (pine1nc.com) for 9940 and 9840 repairs.
They are based in Longmont CO. USA