Hello!
I am using Fancy Prairie's amazing code to filter records based on multiple selections on a form. Everything works great except for one currency field. Here's the huge code in it's entirety:
The field that won't be recognized (using debug.print) is the MinValue field: TAG: Where>=masterquery.itembid; I am asking for a value >=$50,000. If I use JUST the = sign, it works. The notes in the code suggest I can use >=. Please help if you can! I thank you in advance for your assistance!!
I am using Fancy Prairie's amazing code to filter records based on multiple selections on a form. Everything works great except for one currency field. Here's the huge code in it's entirety:
Code:
'+********************************************************************************************
'*
'$ Function: BuildWhere
'*
'* Author: FancyPrairie
'*
'* Date: October, 1998
'*
'* Purpose: This routine will build a Where clause based on the items the user selected/entered on a
'* Report Criteria form (or any type of form that the caller may use to build a Where clause
'* based on the items selected).
'*
'* This routine assumes that, in order for the control to be included in the criteria,
'* it must satisfy the following conditions:
'*
'* 1. Tag Property must contain: Where=TableName.FieldName,FieldType[,Operator,Value]
'* a. TableName.FieldName is the name of the Table and field to filter on
'* (example: tblEmployee.lngEmpID)
'* b. FieldType must be one of the following words: String, Date
'* (Note: String and Date are the only ones that have special meaning at this time
'* (' or #). However, if the FieldType is not String or Date then set
'* you can leave the FieldType empty or (anticipating future uses) set the FieldType
'* to Long, Integer, Byte, Single, Double, Boolean.)
'* c. Operator (optional) can be one of the following: = <> < > <= >= Like IsNull Between. Or it could specify a control on your form (i.e. forms!formName!YourControl)
'* (Default is =)
'* d. Value (optional) to be filtered on (more for option groups and check boxes)
'* (Note: This is primarily intended to be used by Option groups and check boxes.
'* For example, suppose you have a check box. If the box is checked, then
'* the you need to set the Value argument equal to True and the FieldType
'* should be set to Boolean. Else Value should be set to False.)
'* 2. Control must be Enabled
'* 3. Control must be visible
'* 4. If the control is part of a range, then the name of the control must end with
'* either _BeginR (begin range control) or _EndR (end range control)
'*
'* As of this writing, the following controls are checked:
'* 1. List Boxes (multiselect and single select)
'* 2. Ranges (2 controls that are grouped together (i.e. Begin and End Dates)
'* 3. Text Boxes
'* 4. Combo Boxes
'* 5. Option Groups
'* 6. Check Boxes
'*
'* Arguments: frm (form)
'* ----------
'* Represents the form (Report Criteria form) that contains the controls
'* from which the Where clause is to be created.
'*
'* varCtl (ParamArray)
'* -------------------
'* Indicates which controls you want checked. If this argument is missing then
'* this routine loops thru all of the controls on the form searching for the ones
'* whose tag property is set accordingly. Else it only checks the ones passed by the caller.
'*
'* NOTE..NOTE..NOTE..NOTE..NOTE..NOTE..NOTE..NOTE..NOTE..NOTE..NOTE..NOTE..NOTE..NOTE..NOTE
'*
'* This routine assumes that the Where clause will include the AND statement between each set of statements.
'* For Example, (strLastName = 'Smith') AND (strFirstName = 'Justin') However, there are situations where
'* you may want the Where clause to include the OR statement between each set of statements. For example,
'* (strLastName = 'Smith') OR (strFirstName = 'Justin') In this case you need to tell this routine to use
'* OR rather than AND. Therefore, the first argument in this ParamArray should be " OR ".
'*
'* Control Examples:
'*
'* ListBox
'* -------
'* Visible ........ Yes
'* Enabled ........ Yes
'* Multi Select ... None, Simple, or Extended
'* Tag ............ Where=tblEmployee.lngDepartmentID,Number;
'*
'* TextBox
'* -------
'* Visible ........ Yes
'* Enabled ........ Yes
'* Tag ............ Where=tblEmployee.dteBirth,Date,>;
'*
'* Range
'* -----
'* Text Box (Begin Date Range: Name must end with _BeginR)
'* Name ...... txtHireDate_BeginR
'* Visible ... Yes
'* Enabled ... Yes
'* Tag ....... Where=tblEmployee.dteHire,Date;
'*
'* Text Box (End Date Range: Name must end with _EndR)
'* Name ...... txtHireDate_EndR
'* Visible ... Yes
'* Enabled ... Yes
'* Tag ....... (not used...function relies on tag property of BeginDateRange text box)
'*
'* Option Group
'* ------------
'* Visible ... Yes
'* Enabled ... Yes
'* Tag ....... Where=tblEmployee.lngID,Long,=,3;
'*
'* Check Boxes
'* -----------
'* Visible ... Yes
'* Enabled ... Yes
'* Tag ....... Where=tblEmployee.ysnActive,Boolean,=,True;
'*
'* Calling Example:
'*
'* Docmd.OpenReport "rptYourReport", acViewPreview, ,BuildWhere(Me)
'*
'* or strWhere = BuildWhere(Me)
'*
'* or Docmd.OpenReport "rptYourReport", acViewPreview, ,BuildWhere(Me, " OR ")
'*
'* or strWhere = BuildWhere(Me, " OR ")
'*
'-*********************************************************************************************************'
'
Function BuildWhere(frm As Form, _
ParamArray varCtl() As Variant)
'********************************
'* Declaration Specifications *
'********************************
Dim ctl As Control 'Control currently being processed
Dim ctlEndR As Control '2nd control of Range pair
Dim varItem As Variant 'Items within multiselect list box
Dim strAnd As String 'And or ""
Dim strAndOr As String 'Either "And" or "Or"
Dim strCtlType As String 'Control Type of control being processed (also see error handler)
Dim strFieldName As String 'Table.FieldName value
Dim strFieldType As String 'FieldType ' or #
Dim strFieldValue As String 'Value
Dim strOperator As String 'Operator (= <> > < etc)
Dim strOpt As String 'Operator between controls (AND or OR)
Dim strSuffix As String 'Suffix to be appended at end of a string
Dim strwhere As String 'Where clause to be returned to caller
Dim i As Integer 'Working Variable
Dim k As Integer 'Working Variable
Dim bolAll As Boolean 'True if All controls on form to be processed
'****************
'* Initialize *
'****************
On Error GoTo ErrHandler
strwhere = vbNullString
strAnd = vbNullString
'**************************************
'* Begin loop thru controls on form *
'**************************************
If (UBound(varCtl) >= 0) Then
If (varCtl(0) = " OR ") Then strOpt = " OR " Else strOpt = " AND "
If (UBound(varCtl) = 0) And ((varCtl(0) = " OR ") Or (varCtl(0) = " AND ")) Then bolAll = True Else bolAll = False
Else
strOpt = " AND "
bolAll = True
End If
If (bolAll) Then
For Each ctl In frm.Controls
GoSub CreateWhere
Next
Else
If (varCtl(0) = " OR ") Or (varCtl(0) = " AND ") Then k = 1 Else k = 0
For i = k To UBound(varCtl)
Set ctl = varCtl(i)
GoSub CreateWhere
Next i
End If
'***********************
'* Save Where Clause *
'***********************
BuildWhere = strwhere
'********************
'* Exit Procedure *
'********************
ExitProcedure:
Exit Function
'*********************************************
'* Create Where Clause for current control *
'*********************************************
CreateWhere:
strCtlType = BuildWhere_ControlType(frm, ctl)
Select Case strCtlType
Case "Range": GoSub GetTag: GoSub BuildRange 'strWhere = strWhere & strAnd & BuildWhere_Range(frm, ctl)
Case "ListBox": GoSub GetTag: GoSub BuildListBox 'strWhere = strWhere & strAnd & BuildWhere_ListBox(frm, ctl)
Case "TextBox": GoSub GetTag: GoSub BuildTextBox 'strWhere = strWhere & strAnd & BuildWhere_TextBox(frm, ctl)
Case "OptionGroup": GoSub GetTag: GoSub BuildOptionGroup 'strWhere = strWhere & strAnd & BuildWhere_OptionGroup(frm, ctl)
Case "CheckBox": GoSub GetTag: GoSub BuildCheckBox 'strWhere = strWhere & strAnd & BuildWhere_CheckBox(frm, ctl)
Case "ComboBox": GoSub GetTag: GoSub BuildComboBox
End Select
If (Len(strwhere) > 0) Then strAnd = strOpt
Return
'##########################################################################################
'# Retrieve Tag Items #
'##########################################################################################
GetTag:
strFieldName = BuildWhere_GetTag("FieldName", ctl.Tag)
If (Len(strFieldName) = 0) Then Err.Raise vbObjectError + 2000, "BuildWhere (GetTag);" & Err.Source, "Invalid Tag Property (" & ctl.Tag & ")" & vbCrLf & vbCrLf & "The Tag Property should look like this:" & vbCrLf & mstrcTagID & "TableName.FieldName" & mstrcFldSeparator & "FieldType[" & mstrcFldSeparator & "Operator]" & vbCrLf & vbCrLf & "(where FieldType is either String, Date, or Number and Operator (optional) is either =, <>, <, >, <=, >=, Like)"
strFieldType = BuildWhere_GetTag("FieldType", ctl.Tag)
strOperator = BuildWhere_GetTag("Operator", ctl.Tag)
strFieldValue = BuildWhere_GetTag("Value", ctl.Tag)
Return
'##########################################################################################
'# Build Range #
'##########################################################################################
BuildRange:
'**********************************************************
'* Determine control that represents the End date range *
'**********************************************************
On Error Resume Next
Set ctlEndR = frm(Left$(ctl.Name, Len(ctl.Name) - Len(mstrcRange_Begin)) & mstrcRange_End)
If (Err.Number = 2465) Then
On Error GoTo 0
Err.Raise vbObjectError + 2001, "BuildWhere (" & strCtlType & ");" & Err.Source, "Invalid Range" & vbCrLf & vbCrLf & "You have declared a text box that represents the Begin Range (" & ctl.Name & ") but you did not declare a control that represents the End Range (" & Left$(ctl.Name, Len(ctl.Name) - Len(mstrcRange_Begin)) & mstrcRange_End & ")"
End If
If (IsNull(ctlEndR)) Then
On Error GoTo 0
Err.Raise vbObjectError + 2002, "BuildWhere (" & strCtlType & ");" & Err.Source, "Invalid Range" & vbCrLf & vbCrLf & "Your entered a value for the Begin Range but failed to enter a value for the End Range."
End If
'*****************
'* Build Where *
'*****************
On Error GoTo ErrHandler
If (Len(strFieldValue) = 0) Then strFieldValue = CStr(ctl.Value)
If (strFieldType = "#") Then 'IFT, then Date Field
strwhere = strwhere & strAnd & " (" & strFieldName & " Between #" & strFieldValue & "# AND #" & ctlEndR.Value & "#) "
Else
strwhere = strwhere & strAnd & " (" & strFieldName & " Between " & strFieldType & strFieldValue & strFieldType & " AND " & strFieldType & ctlEndR.Value & strFieldType & ") "
End If
strAnd = strOpt
Return
'##########################################################################################
'# List Box #
'##########################################################################################
BuildListBox:
'*******************************************
'* Determine Operator (=, >, Like, etc.) *
'*******************************************
strAndOr = vbNullString
If (Len(strOperator) > 0) Then
If (strOperator = "<>") Then strAndOr = " AND " Else strAndOr = " OR "
End If
If (Len(strOperator) = 0) Or (strOperator = "=") Then
strwhere = strwhere & strAnd & " (" & strFieldName & " In ("
strSuffix = ", "
Else
strSuffix = ") "
End If
If (ctl.MultiSelect) Then
For Each varItem In ctl.ItemsSelected
If (Len(strOperator) = 0) Or (strOperator = "=") Then
strwhere = strwhere & strFieldType & ctl.Column(ctl.BoundColumn - 1, varItem) & strFieldType & strSuffix
Else
strwhere = strwhere & strAnd & "(" & strFieldName & " " & strOperator & " " & strFieldType & ctl.Column(ctl.BoundColumn - 1, varItem) & strFieldType & strSuffix
strAnd = " AND "
End If
Next varItem
If (Len(strOperator) = 0) Or (strOperator = "=") Then
strwhere = Mid(strwhere, 1, Len(strwhere) - Len(strSuffix)) & ")) "
Else
strwhere = Mid(strwhere, 1, Len(strwhere) - Len(strSuffix)) & ") "
End If
Else
If (Len(strFieldValue) = 0) Then strFieldValue = ctl.Column(ctl.BoundColumn - 1)
If (Len(strOperator) = 0) Or (strOperator = "=") Then
strwhere = strwhere & strFieldType & strFieldValue & strFieldType & ")) "
Else
strwhere = strwhere & strAnd & "(" & strFieldName & " " & strOperator & " " & strFieldType & ctl.Column(ctl.BoundColumn - 1, varItem) & strFieldType & ") "
End If
End If
strAnd = strOpt
Return
'##########################################################################################
'# Text Box #
'##########################################################################################
BuildTextBox:
If (Len(strFieldValue) = 0) Then strFieldValue = ctl.Value
strwhere = strwhere & strAnd & " (" & strFieldName & " " & strOperator & " " & strFieldType & strFieldValue & strFieldType & ") "
strAnd = strOpt
Return
'##########################################################################################
'# Option Group #
'##########################################################################################
BuildOptionGroup:
If (Len(strFieldValue) = 0) Then strFieldValue = ctl.Value
strwhere = strwhere & strAnd & " (" & strFieldName & " " & strOperator & " " & strFieldType & strFieldValue & strFieldType & ") "
strAnd = strOpt
Return
'##########################################################################################
'# Check Box #
'##########################################################################################
BuildCheckBox:
If (Len(strFieldValue) = 0) Then strFieldValue = ctl.Value
strwhere = strwhere & strAnd & " (" & strFieldName & " " & strOperator & " " & strFieldType & strFieldValue & strFieldType & ") "
strAnd = strOpt
Return
'##########################################################################################
'# Combo Box #
'##########################################################################################
BuildComboBox:
'*******************************************
'* Determine Operator (=, >, Like, etc.) *
'*******************************************
strAndOr = vbNullString
If (Len(strOperator) = 0) Or (strOperator = "=") Then
strwhere = strwhere & strAnd & " (" & strFieldName & " = "
strSuffix = ") "
Else
strwhere = strwhere & strAnd & " (" & strFieldName & " " & strOperator & " "
strSuffix = ") "
End If
If (Len(strFieldValue) = 0) Then strFieldValue = ctl.Column(ctl.BoundColumn - 1)
strwhere = strwhere & strFieldType & strFieldValue & strFieldType & strSuffix
strAnd = strOpt
Return
'****************************
'* Error Recovery Section *
'****************************
ErrHandler:
Err.Raise Err.Number, "BuildWhere (" & strCtlType & ");" & Err.Source, Err.Description
End Function
'+********************************************************************************************
'*
'$ Function: BuildWhere_ControlType
'*
'* Author: FancyPrairie
'*
'* Date: April, 1998
'*
'* Purpose: This routine determines if a control should be included (valid) if it meets the following conditions:
'*
'-********************************************************************************************
'
Function BuildWhere_ControlType(frm As Form, ctl As Control) As String
'********************************
'* Declaration Specifications *
'********************************
Dim strTemp As String 'Working variable
Dim varValue As Variant 'Working variable
'****************
'* Initialize *
'****************
On Error GoTo ErrHandler
BuildWhere_ControlType = vbNullString 'Assume invalid
strTemp = Replace(ctl.Tag, " ", vbNullString) 'Strip out all spaces
If (InStr(strTemp, mstrcTagID) > 0) Then 'If true, Tag Property contains "Where="
If (ctl.ControlType = acListBox) Then
If (ctl.MultiSelect) And (ctl.ItemsSelected.Count > 0) And (ctl.Enabled) And (ctl.Visible) Then BuildWhere_ControlType = "ListBox"
If (Not ctl.MultiSelect) And (Not IsNull(ctl.Value)) And (ctl.Enabled) And (ctl.Visible) Then BuildWhere_ControlType = "ListBox"
ElseIf ((ctl.ControlType = acTextBox) Or (ctl.ControlType = acComboBox) Or (ctl.ControlType = acOptionGroup) Or (ctl.ControlType = acOptionButton) Or (ctl.ControlType = acCheckBox)) And (ctl.Enabled) And (ctl.Visible) Then
If (ctl.ControlType = acOptionButton) Then
If (ctl.Parent.ControlType = acOptionGroup) Then
If (ctl.OptionValue = ctl.Parent.Value) Then varValue = ctl.Parent.Value Else varValue = Null
Else
varValue = ctl.Value
End If
Else
varValue = ctl.Value
End If
If (Not IsNull(varValue)) And (Len(varValue) > 0) Then
If (Right$(ctl.Name, Len(mstrcRange_End)) = mstrcRange_End) Then GoTo ExitProcedure
If (Right$(ctl.Name, Len(mstrcRange_Begin)) = mstrcRange_Begin) Then
On Error GoTo 0
If (Not BuildWhere_ValidRange(frm, ctl)) Then Err.Raise vbObjectError + 2002, "BuildWhere_ControlType", "Incomplete Range Specifications." & vbCrLf & vbCrLf & "You failed to enter/select a value for " & ctl.Name
On Error GoTo ErrHandler
BuildWhere_ControlType = "Range"
ElseIf (ctl.ControlType = acTextBox) Then
BuildWhere_ControlType = "TextBox"
ElseIf (ctl.ControlType = acComboBox) Then
BuildWhere_ControlType = "ComboBox"
ElseIf (ctl.ControlType = acOptionGroup) Or (ctl.ControlType = acOptionButton) Then
BuildWhere_ControlType = "OptionGroup"
ElseIf (ctl.ControlType = acCheckBox) Then
BuildWhere_ControlType = "CheckBox"
End If
End If
End If
End If
'********************
'* Exit Procedure *
'********************
ExitProcedure:
Exit Function
'****************************
'* Error Recovery Section *
'****************************
ErrHandler:
Err.Raise Err.Number, "BuildWhere_ControlType;" & Err.Source, Err.Description
End Function
'+********************************************************************************************
'*
'$ Function: BuildWhere_ValidRange
'*
'* Author: FancyPrairie
'*
'* Date: April, 1998
'*
'* Purpose: Determines if the values of 2 controls, that represent ranges, are valid. They are not valid
'* if one or both controls do not contain a '-********************************************************************************************
'
Function BuildWhere_ValidRange(frm As Form, ctl As Control) As Boolean
'********************************
'* Declaration Specifications *
'********************************
Dim ctlEnd As Control
'******************************************************************
'* Create array with just those text boxes that meet the specs. *
'******************************************************************
On Error GoTo ErrHandler
Set ctlEnd = frm(Left(ctl.Name, Len(ctl.Name) - Len(mstrcRange_Begin)) & mstrcRange_End)
If (IsNull(ctl)) Or (Len(ctl) = 0) Or (IsNull(ctlEnd)) Or (Len(ctlEnd) = 0) Then
BuildWhere_ValidRange = False
Else
BuildWhere_ValidRange = True
End If
'********************
'* Exit Procedure *
'********************
ExitProcedure:
Exit Function
'****************************
'* Error Recovery Section *
'****************************
ErrHandler:
Err.Raise Err.Number, "BuildWhere_ValidRange;" & Err.Source, Err.Description
End Function
'+********************************************************************************************
'*
'$ Function: BuildWhere_GetTag
'*
'* Author: FancyPrairie
'*
'* Date: April, 1998
'*
'* Purpose: This routine will return the value for a given Tag Item. The caller specifies
'* which item they want returned. Possible items are:
'* 1. FieldName
'* 2. FieldType
'* 3. Operator
'* 4. Value
'*
'-********************************************************************************************
'
Function BuildWhere_GetTag(strFunction As String, strTag As String) As String
'********************************
'* Declaration Specifications *
'********************************
Dim i As Integer 'Working variable
Dim j As Integer 'Working variable
Dim k As Integer 'Working variable
Dim strTemp As String 'Working variable
Dim var As Variant 'Working variable
On Error GoTo ErrHandler
'**************************************************************
'* Loop to find "Where=" Tag within Controls Tag Property *
'* When the "Where=" is found, then parse out the item *
'* the caller requested (i.e. FieldName,FieldType,Operator) *
'**************************************************************
var = Split(strTag, mstrcTagSeparator)
BuildWhere_GetTag = vbNullString
For i = 0 To UBound(var)
strTemp = Replace(CStr(var(i)), " ", vbNullString)
j = InStr(1, strTemp, mstrcTagID) 'Find "Where="
If (j = 1) Then 'If true, found "Where="
strTemp = CStr(var(i))
j = InStr(1, strTemp, "=")
var = Split(Mid(strTemp, j + 1), mstrcFldSeparator)
'***************
'* FieldName *
'***************
If (strFunction = "FieldName") Then
On Error Resume Next
Eval (var(0))
If (Err.Number) Then
Err.Clear
BuildWhere_GetTag = Trim(CStr(var(0)))
Else
BuildWhere_GetTag = Eval(var(0))
End If
On Error GoTo ErrHandler
'***************
'* FieldType *
'***************
ElseIf (strFunction = "FieldType") Then
If (UBound(var) < 1) Then
BuildWhere_GetTag = vbNullString
Else
Select Case Trim(CStr(var(1)))
Case "String": BuildWhere_GetTag = mstrcStringSymbol
Case "Date": BuildWhere_GetTag = mstrcDateSymbol
Case Else: BuildWhere_GetTag = vbNullString
End Select
End If
'**************
'* Operator *
'**************
ElseIf (strFunction = "Operator") Then
If (UBound(var) < 2) Then
BuildWhere_GetTag = "="
Else
On Error Resume Next
Eval (var(2))
If (Err.Number) Then
Err.Clear
BuildWhere_GetTag = Trim(CStr(var(2)))
Else
BuildWhere_GetTag = Eval(var(2))
End If
On Error GoTo ErrHandler
End If
'***********
'* Value *
'***********
ElseIf (strFunction = "Value") Then
If (UBound(var) < 3) Then
BuildWhere_GetTag = vbNullString
Else
On Error Resume Next
Eval (var(3))
If (Err.Number) Then
Err.Clear
BuildWhere_GetTag = Trim(CStr(var(3)))
Else
BuildWhere_GetTag = Eval(var(3))
End If
On Error GoTo ErrHandler
End If
End If
Exit Function
End If
Next i
'********************
'* Exit Procedure *
'********************
ExitProcedure:
Exit Function
'********************
'* Error Recovery *
'********************
ErrHandler:
Err.Raise Err.Number, "BuildWhere_GetTag;" & Err.Source, Err.Description
End FunctionThe field that won't be recognized (using debug.print) is the MinValue field: TAG: Where>=masterquery.itembid; I am asking for a value >=$50,000. If I use JUST the = sign, it works. The notes in the code suggest I can use >=. Please help if you can! I thank you in advance for your assistance!!
![[hairpull2]](/data/assets/smilies/hairpull2.gif "[hairpull2] [hairpull2]")
, but you can show your appreciation for his help by clicking on [blue]Great post![/blue] link on helpful post.
