Building a new phone

[bhorocks]

Ok,

I have recieved the duties of managing our nortel switch. I am new at it and learning the ropes. I need to be able to build a phone but do not know how to enter in the features that i need. If i could duplicate the commands below besides changing the exctensions and names that would be great. I am using procomm plus and i read on the forums you can use a script to build phones?

anyways here is what i am trying to duplicate. any help would be awesome


DES IT
TN 036 0 02 15
TYPE 3904
CDEN 8D
CTYP XDLC
CUST 0
FDN 8499
TGAR 1
LDN NO
NCOS 4
SGRP 0
RNPG 0
SCI 0
SSU
LNRS 16
XLST
CLS CTD FBD WTA LPR MTA FNA HTA TDD HFA GRLD CRPD STSD
MWA RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD MCTD CLBD AUTU
GPUD DPUD DNDD CFXA ARHA FITD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AHD
DDGA NAMA
USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC MCBN
CPND_LANG ENG
RCO 0
HUNT 8499
LHK 2
PLEV 02
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
MLNG ENG
DNDR 0
KEY 00 SCR 8497 0 MARP
CPND
NAME Billy Graham
XPLN 27
DISPLAY_FMT FIRST,LAST
01 SCR 5758 0 MARP
CPND
NAME Billy Graham
XPLN 27
DISPLAY_FMT FIRST,LAST
02 ADL 16
03 SCR 8490 0
CPND
NAME IT Direct Line
XPLN 27
DISPLAY_FMT FIRST,LAST
04 SCR 6490 0
CPND
NAME INFO SYSTEMS
XPLN 27
DISPLAY_FMT FIRST,LAST
05 COS
06 SCR 8491 0
CPND
NAME DATA CENTER
XPLN 27
DISPLAY_FMT FIRST,LAST
07
08
09
10
11
12
13
14
15
16 MWK 8499
17 TRN
18 AO6
19 CFW 16 8500
20 RGA
21 PRK
22 RNP
23
24 PRS
25 CHG
26 CPN
27 CLT
28 RLT
29
30
31
DATE 29 NOV 2006


\
thanks for any help

 

[AlphaG33k]

instead of building a new phone just do cpy 1 of the exsisting phone and all it is going to ask you for is the new dn for key 00. So first do an prt <enter> ludn to prt a list of the unused dn's and then do a cpy 1 to copy the phone. its going to ask for your from tn and your totn the from in your case would be TN 036 0 02 15 and the totn would be whatever tn your copying it to. Hope this helps.

 

[acewarlock]

Decide what DN you want the new phone to have and then do a copy in
LD 20
REQ CPY 1
TYPE 3904
CFTN 33 7
DES TELCO

*** MAKE PRINTER READY ***
TN 39 3
DN 1234

NEW 3904 TN 039 0 00 03 DN 1234
HNT FNA
HNT FNA
HNT FNA

SCH5525
*** FINISHED ***
MEM AVAIL: (U/P): 1066648 USED U P: 131499 161724 TOT: 1359871
DISK RECS AVAIL: 265
TNS AVAIL: 51 USED: 449 TOT: 500
ACD AGENTS AVAIL: 292 USED: 8 TOT: 300
AST AVAIL: 100 USED: 0 TOT: 100
DATA PORTS AVAIL: 2500 USED: 0 TOT: 2500
DIGITAL TELEPHONES AVAIL: 2288 USED: 212 TOT: 2500
INTERNET TELEPHONES AVAIL: 8 USED: 0 TOT: 8

 

[bhorocks]

right on thx. but then how do i make the changes to the keys?

like this =below? i want to change form this copy:

KEY 00 SCR 8497 0 MARP
CPND
NAME Billy Graham
XPLN 27
DISPLAY_FMT FIRST,LAST


to this:

KEY 00 SCR 8423 0 MARP
CPND
NAME bla bla
XPLN 27
DISPLAY_FMT FIRST,LAST

or to add and remove those extra keys.

thanks for the help it is awesome

 

[bhorocks]

i mean to change key 1 key 2 etc and to remove keys from an existing phone

 

[bigindian65]

if you want to remove a key:

key 2 nul <enter>

If you want to chg a key, go right over top of it
key 1 is 1 scr 3567

chg it - key 1 scr 8901 <enter>

want the same DID w/ diff name?
go to ld 95 and chg - name cust 0
dn - XXXX

 

[acewarlock]

I have 3 TN's that I use to make a cpy from, 1 3903, 1 3904 and 1 500 set usedfor Fax's and modems.

I do an easy change.

REQ: chg
TYPE: 3904
TN 33 3
ECHG yes
ITEM you can enter a KEY or CLS here.

 

[bhorocks]

perfect thanks

 

[SteveLord]

Welcome to the forums. I've been in the same situation as you (although I wasn't lucky with having Procomm early on.) I am still learning the ropes here. =)




IT Admin (PBX Newbie)
Nortel Option11
Version 1411
Release 21
Issue 7+
MerMail 10.7.2

 

[bhorocks]

i just recieved the procomm last month. i like the ability to not have to leave the office to sit in the switch room.

 

[bhorocks]

ok i must be missing something

i goto change key but i get this

REQ: chg
TYPE: 3904
TN 4 0 2 14
ECHG key SCH0101
ECHG 01
SCH0101

can't get the key to go

 

[bhorocks]

ok got the key portion gong but after i make these changes i still dont see it. how do i save ? i am jsut exiting out

REQ: chg
TYPE: 3904
TN 4 0 2 14
ECHG yes
ITEM key
ITEM key 6 scr 8496
HNT FNA
MARP ON TN 004 1 01 15
MARP
CPND
VMB
KEY
ITEM ****

 

[bhorocks]

got it. nevermind thx!

 

[LeeMcCauslin]

THe answer to the ECHG prompt is "yes"
it will then prompt you for:
ITEM
and you enter what you want to change - ie:

key 0 scr 6490

which will set your first key to single call ring with extension 6490

next the system will prompt you for
CPND (calling party name display)
if you copied this phone and are setting it up for the new user you will answer:
NEW
it will prompt NAME
and you type in the name: Billy Graham (I thought he retired! ;-) )
and the system will prompt you for XPLN (expected length) and you have to enter a number that is at least as many characters as you will need for the name up to 24 or 25 (I forget).
If you are simply changing an existing set that was not just copied or built new, at he CPND prompt you type "CHG" and then do the same as above.
after, you can enter until you get out or change other items...

 

[LeeMcCauslin]

I'm too slow again - but good for you getting that.

 

[bhorocks]

that rocks