Building a 2616 from scratch

[moscow]

Does anyone know how to build a 2616 w/ display line by line.

I accidently "outted" an existing extension using LD 20. And now I don't know how to build it back up.

LD 20
PRT: OUT
TYPE: 2616
TN: 16 11

Thanks.

 

[PERRYPJ]

IF YOUR NOT VERSED IN SOFTWARE THE EASIEST THING TO DO TO GET THEM GOING IS TO COPY, FIND ANOTHER 2616 THEN DO A CPY 1 IT WILL ASK WHAT TN ARE YOU COPYING FROM THEN IT WILL ASK WHERE YOU WANT IT (16 11).
THEN YOU CAN MODIFY IT

OLD ROLMEN WORKING ON NORTELS

 

[acewarlock]

Never out anything until you do a print out out the TN first.

 

[GHTROUT]

The way to start is in LD 11, REQ new, TYPE 2616, ...at this point, notice the link I have below.

Being this is one of your initial attempts, a good way is to try to "hit return" past all the prompts without typing anything. This will produce a basic phone - it may not work at first, but it will fill in a lot of fields automatically - then you print another persons phone and compare the one you built with their phone and the differences are what you consider changing.

Here is a guide (extracted from the Meridian books) that might be easier than searching through hundreds of pages. It is a zip file that contains two versions of manuals I created just for people in your situation:

http://www.ghtrout.com/ghtrout/introverlay/INTROVERLAY.zip

~

http://www.GHTROUT.com/