RonBlizzard
Technical User
Our Switch was patched by the Vendor last night. Most problems seemed to have cleared, but we are now getting a broadcast BUG471.
BUG471 Prevented indefinite while loop in procedure CHECK_4_JUNC
Reason:BRDCAST_YOUNG Call register and BRDCAST_OLDEST Call register are same
HEADPTR :0x70FCD5E;BRDCAST_YOUNG :0x1 ;CRLINK :0x0 ;BACKLINK :0x0 ;
ORIGTN of BRDCAST_YOUNG Call register is :0x0
Nortel's website doesn't seem to show any patch for this bug. Has anyone else run into it?
Thanks for any information.
(We're running version 5 of the software... unfortunately.)
BUG471 Prevented indefinite while loop in procedure CHECK_4_JUNC
Reason:BRDCAST_YOUNG Call register and BRDCAST_OLDEST Call register are same
HEADPTR :0x70FCD5E;BRDCAST_YOUNG :0x1 ;CRLINK :0x0 ;BACKLINK :0x0 ;
ORIGTN of BRDCAST_YOUNG Call register is :0x0
Nortel's website doesn't seem to show any patch for this bug. Has anyone else run into it?
Thanks for any information.
(We're running version 5 of the software... unfortunately.)