NTP says a BUG 4108 = incoming msg not allowed for this application. ?
NT have sent the reply as below ,,,,
BUG4108: 22 25
The code is for the Third Party Server. The procedure is the centralised point for processing messages of the application type TPS.
The code goes through the message type that it has received, checks to see if it is supported which would then hit more code, else it was call the Invalid procedure which in turn calls the BUG4108 code.
The supported messages in this procedure are CSL_MON, CSL_SETFTR, CSL_CALLDIS, CSL_CALLANS, CSL_CON & CSL_QUERY.
In the BUG4108 are 2 important numbers, 22 and then 25.
22 is the Application type which is the Third Party Server.
25 is the CSL_KEY message which is a call processing msg for the VAS SL-1 Key functions SL-1 <-> VAS.
Therefore we received an incoming Key function message from a Third Party Server and the code says that this is not supported, with the result of dropping the message.
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.