BRU vs PRI

[sheldondon]

I have a site that is using a MICS and is setup for a BRU can this same card and keycode license be converted or used if we switch over to a PRI? I checked with the HARDWARE options and it does not show PRI as an option just BRU and T1 ext..

 

[curlycord]

Did you mean BRI?
BRU = Backup and Restore Utility

DTI card is required for both.


=----(((((((((()----=
curlycord

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[exsmogger]

The BRI trunk cards are different from the digital trunk card used for T1 or PRI. If you don't see the option for a PRI then you need to buy a PRI Enabler keycode.

Brian Cox
Georgia Telephone

http://Georgia-Telephone.com

http://www.linkedin.com/in/briancox1952

 

[sheldondon]

Yes that is correct. I must not have the PRI option. Thanks!

 

[hawks]

don't forget the card also, you probably have one of the following right now for BRI.

Norstar BRI 2 Port U-interface NT7B86GA
Norstar BRI 4-Port Station Card NT7B87GA

For PRI you'll need NT7B74AAAA Norstar Digital Trunk Interface Cartridge plus the Keycode.