Browsing settings file showing internal IPs

[Bucky101]

Hey Guys,

Something is not right. If I browse the auto settings file internally I an seeing the internal IPs in areas such as SIP_CONTROLLER_LIST and FQDN_IP_MAP. If I browse externally, instead of these numbers getting changed to the public IP they are coming back to me as the internal IP.
What is wrong?

 

[derfloh]

You have no public IP on your Topology and no SIP FQDN set up.

IP Office remote service

https://www.fwilke.com/home

Fixed price SIP trunk configuration:

https://www.fwilke.com/en/ip-office-sip-trunk-en/

CLI based cale blocking:

https://blog.fwilke.com/ip-office-block-calls-from-specific-cli/

SCN fallback over PSTN:

https://blog.fwilke.com/ip-office-scn-fallback/

 

[Bucky101]

i have both :S

 

[janni78]

I'm assuming this gets populated from the "SIP Registrar FQDN" setting in IP Office.

If you connect both from internal and external destinations you wanna have a resolvable DNS.

"Trying is the first step to failure..." - Homer

 

[Bucky101]

Hey Guys,

Yes I do have a split DNS. ie inside resolves to internal IP and outside resolves to the 1:1 NATted IP