I am trying to test port security on a Cisco 2950 switch. In order to do that I need a tool to generate a broadcast storm on the switch. I want to determine what combination of commands will work to block a storm. I can't just put port security on all the ports on the switch because we use controlled broadcasts on a regular basis. Does anyone know of a tool that preferably runs on Windows that can cause a storm?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Broadcast Storm Test Tool
- Thread starter dosejam
- Start date
Hi,
iperf is the best tool under Windows for stress testing regading storm control. Create a static ARP mapping for a IP to the MAC FF:FF:FF:FF:FF:FF to test controlled broadcasts at layer two with your Cisco 2950.
HTH
BTW - has nothing to do with Sniffer
Werner Fischer
SCM / Double-CCIE / JNCIS
look at the frames - bit by bit
iperf is the best tool under Windows for stress testing regading storm control. Create a static ARP mapping for a IP to the MAC FF:FF:FF:FF:FF:FF to test controlled broadcasts at layer two with your Cisco 2950.
HTH
BTW - has nothing to do with Sniffer
Werner Fischer
SCM / Double-CCIE / JNCIS
look at the frames - bit by bit
- Status
Similar threads
- Locked
- Question