bobbywires
Technical User
I have an Intuity Audix and when we send a broadcast message out the light does not come on the phones...
is their something in programming to change?
is their something in programming to change?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Broadcast Meesage
- Thread starter bobbywires
- Start date
- Status
No. This is set that way on purpose. You can manually turn on the MWI light if you want. Go to this manual and go to page 394.
Susan
“Before you criticize someone, you should walk a mile in their shoes.
Then, when you criticize them, you are a mile away ...
and you have their shoes.”
Susan
“Before you criticize someone, you should walk a mile in their shoes.
Then, when you criticize them, you are a mile away ...
and you have their shoes.”
Press *M (*6) to (access additional options), and press:
1 - Turn on message notification. (Press 1 again to undo.)
2 - Change message expiration from the 2-day default.
a. Enter numbers for the month and day of expiration. For example, press 1008 for October 8th.
The month can be either one or two digits, while the day requires two digits.
b. Press # to save expiration date or press 2 to start over.
Press # to approve broadcast options.
1 - Turn on message notification. (Press 1 again to undo.)
2 - Change message expiration from the 2-day default.
a. Enter numbers for the month and day of expiration. For example, press 1008 for October 8th.
The month can be either one or two digits, while the day requires two digits.
b. Press # to save expiration date or press 2 to start over.
Press # to approve broadcast options.
- Status
Similar threads
- Locked
- Question