Jun 20, 2003 #1 MOIPOWER Technical User Jun 6, 2003 12 0 0 ES Commands to activate a rank of bearing been brief from the 38100 to the 38199? Thank you very much
Jun 20, 2003 #2 ButtonIt Vendor Apr 1, 2003 126 0 0 GB Moipower - could you try to explain a bit more? Do you mean Abbreviated dialling? Upvote 0 Downvote
Jun 20, 2003 Thread starter #3 MOIPOWER Technical User Jun 6, 2003 12 0 0 ES Pardon by my English Abbreviated dialling for BC10 Upvote 0 Downvote
Jun 20, 2003 #4 ButtonIt Vendor Apr 1, 2003 126 0 0 GB First state the number range to be used: NANSI:NUMTYP=AC,NUMSE=38100&&38199; Then you can initiate the Abb Dial: ADCOI:ABB=38100,TRA=xxxxxxxxxxxxx,CLASS=y; The CLASS parameter is the first 2 digits of extension's TRAF, ie. TRAF=01xxyyzz can call an abb dial with Class 1 TRAF=02xxyyzz can call an abb dial with class 2 To have the Abb Dial fully open: ADCOI:ABB=38100,TRA=xxxxxxxxxxxxxx,CLASS=0&&3; Hope this helps. Upvote 0 Downvote
First state the number range to be used: NANSI:NUMTYP=AC,NUMSE=38100&&38199; Then you can initiate the Abb Dial: ADCOI:ABB=38100,TRA=xxxxxxxxxxxxx,CLASS=y; The CLASS parameter is the first 2 digits of extension's TRAF, ie. TRAF=01xxyyzz can call an abb dial with Class 1 TRAF=02xxyyzz can call an abb dial with class 2 To have the Abb Dial fully open: ADCOI:ABB=38100,TRA=xxxxxxxxxxxxxx,CLASS=0&&3; Hope this helps.
Jun 20, 2003 Thread starter #5 MOIPOWER Technical User Jun 6, 2003 12 0 0 ES Thank you. I have authority of level 5 and I cannot execute this command. That authority need I? as I can to obtain it Upvote 0 Downvote
Thank you. I have authority of level 5 and I cannot execute this command. That authority need I? as I can to obtain it
Jun 20, 2003 #6 ButtonIt Vendor Apr 1, 2003 126 0 0 GB Find the authority needed by: IOCAP:COM=NANSI; and IOCAP:COM=ADCOI; this will tell you what authority the command is. On my switch NANSI is AUTH=3 and ADCOI is AUTH=2. You will need to get your local vendor to lower these commands to your level. Upvote 0 Downvote
Find the authority needed by: IOCAP:COM=NANSI; and IOCAP:COM=ADCOI; this will tell you what authority the command is. On my switch NANSI is AUTH=3 and ADCOI is AUTH=2. You will need to get your local vendor to lower these commands to your level.