Bridging 2 MICS 6.1

[Rapetou]

Hi!

If i want to link two MICS rev.6.1 with full transparency i should use the MCDN or MDCN package wright?

If yes all information i saw on this option we should use a PRI trunk between these tweo KSU wright?

So, if i have a full T1 trunk (wireless) between them, can i use it also?

Thank's

 

[Rapetou]

Any answer??????

 

[salo0920]

You need PRI keycodes for BOTH systems and MCDN keycodes for BOTH systems. Then, any T1 between should work. Ultimately, wired or wireless you need to end up with a standard T1 (ESF, B8ZS) or equivalent on an RJ48C plug to plug into each T1 card.

 

[Rapetou]

Hey thank's !!!!

But, why should i use PRI keycodes?

Can'i use many DS0 on T1?

Thank's again!!!

 

[salo0920]

In order to get the most seamless connectivity across the span (including passing CallerID information and central AA) you need to support MCDN. I think that MCDN will only work with PRI and not with T1 E&M. Of this, I am not absolutely sure so someone else might want to confirm this.

Thanks
Harold