Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BRI(2B+D) trunk line interrupt

Status
Not open for further replies.

wxg

Technical User
Nov 6, 2004
6
CN
Hi All,

We have a S8300 and use BRI and Analog trunk,but the BRI lines are always disconnected,the time is about 10 - 15 minutes.But the analog trunk are never interrupt in the same system.
Did anyone met the problem?
Any ideas?

Thanks
WXG

 
Do 'status syn' and see if your system is sync off the tone board. Do u have an PRi in the system? If u do the syn should be on it.

Da-vi'do

P.S. A message to all,if you want to get the best response to a question, please read FAQ222-2244 first. Also give the type & version of your voice mail & pbx system & preview your post to make sure it is complete & understandable. Be aware that if u don't answer a question, I usually will not continue to help u.
 
Thanks,I will try it.I have no PRI in the system.

WXG
 
can not run command "st syn" or "ch syn" on S8300 system,how to do?

Thanks
WG
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top