Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Brand new switch can't reach internet

Status
Not open for further replies.

techalum

IS-IT--Management
Oct 11, 2006
38
US
I have a brand new force10 switch. I plugged it into the network and gave it a management IP address. I can reach anything witn our network. But I can't ping out to the internet? I know this is something very basic. But I am a phone guy and they keep throwing this network stuff at me.SH RUN is below. Force10 has the exact same CLI as Cisco. Actually started by Cisco employees.
Current Configuration ...
! Version 7.8.1.0
! Last configuration change at Mon Feb 9 05:11:55 2009 by Adm1n
! Startup-config last updated at Fri Feb 6 12:28:17 2009 by Adm1n
!
hardware watchdog
!
hostname Force10
!
enable secret 5 3bac67ad1bd0deec41973f5cd1646644
!
username Adm1n password 7 49b76c098f3b0d2bd6b1ffa5529bb3ac
!
stack-unit 0 provision S25N
!
interface GigabitEthernet 0/1
no ip address
switchport
no shutdown
!
interface GigabitEthernet 0/2
no ip address
no shutdown
--More--        !
interface GigabitEthernet 0/3
no ip address
no shutdown
!
interface GigabitEthernet 0/4
no ip address
no shutdown
!
interface GigabitEthernet 0/5
no ip address
no shutdown
!
interface GigabitEthernet 0/6
no ip address
no shutdown
!
interface GigabitEthernet 0/7
no ip address
no shutdown
!
interface GigabitEthernet 0/8
no ip address
--More--         no shutdown
!
interface GigabitEthernet 0/9
no ip address
no shutdown
!
interface GigabitEthernet 0/10
no ip address
no shutdown
!
interface GigabitEthernet 0/11
no ip address
no shutdown
!
interface GigabitEthernet 0/12
no ip address
no shutdown
!
interface GigabitEthernet 0/13
no ip address
no shutdown
!
interface GigabitEthernet 0/14
--More--         no ip address
no shutdown
!
interface GigabitEthernet 0/15
no ip address
no shutdown
!
interface GigabitEthernet 0/16
no ip address
no shutdown
!
interface GigabitEthernet 0/17
no ip address
no shutdown
!
interface GigabitEthernet 0/18
no ip address
no shutdown
!
interface GigabitEthernet 0/19
no ip address
no shutdown
!
--More--        interface GigabitEthernet 0/20
no ip address
no shutdown
!
interface GigabitEthernet 0/21
no ip address
no shutdown
!
interface GigabitEthernet 0/22
no ip address
no shutdown
!
interface GigabitEthernet 0/23
no ip address
no shutdown
!
interface GigabitEthernet 0/24
description Management Port
ip address 10.0.1.17/23
no shutdown
!
stack-unit 1 provision S25N
!
--More--        interface GigabitEthernet 1/1
no ip address
no shutdown
!
interface GigabitEthernet 1/2
no ip address
no shutdown
!
interface GigabitEthernet 1/3
no ip address
no shutdown
!
interface GigabitEthernet 1/4
no ip address
no shutdown
!
interface GigabitEthernet 1/5
no ip address
no shutdown
!
interface GigabitEthernet 1/6
no ip address
no shutdown
--More--        !
interface GigabitEthernet 1/7
no ip address
no shutdown
!
interface GigabitEthernet 1/8
no ip address
no shutdown
!
interface GigabitEthernet 1/9
no ip address
no shutdown
!
interface GigabitEthernet 1/10
no ip address
no shutdown
!
interface GigabitEthernet 1/11
no ip address
no shutdown
!
interface GigabitEthernet 1/12
no ip address
--More--         no shutdown
!
interface GigabitEthernet 1/13
no ip address
no shutdown
!
interface GigabitEthernet 1/14
no ip address
no shutdown
!
interface GigabitEthernet 1/15
no ip address
no shutdown
!
interface GigabitEthernet 1/16
no ip address
no shutdown
!
interface GigabitEthernet 1/17
no ip address
no shutdown
!
interface GigabitEthernet 1/18
--More--         no ip address
no shutdown
!
interface GigabitEthernet 1/19
no ip address
no shutdown
!
interface GigabitEthernet 1/20
no ip address
no shutdown
!
interface GigabitEthernet 1/21
no ip address
no shutdown
!
interface GigabitEthernet 1/22
no ip address
no shutdown
!
interface GigabitEthernet 1/23
no ip address
no shutdown
!
--More--        interface GigabitEthernet 1/24
no ip address
no shutdown
!
interface Vlan 1
!
interface Vlan 10
no ip address
untagged GigabitEthernet 0/1
no shutdown
!
banner login ^C
***************************************
WARNING
UNAUTHORIZED ACCESS FORBIDDEN

BRANDT

The system you are accessing is property
of Brandt. Unauthorized access
is PROHIBITED.

Proceeding beyond this point acknowledges
--More--        that you have been explicitly authorized
by Brandt in writing to access
this secured system.

Criminal and civil prosecution will be
pursued against any person or entity that
violates this agreement.
*****************************************
^C
!
line console 0
login authentication l3tm31nn0w
line vty 0
password 7 49b76c098f3b0d2bd6b1ffa5529bb3ac
privilege level 15
line vty 1
password 7 49b76c098f3b0d2bd6b1ffa5529bb3ac
line vty 2
password 7 49b76c098f3b0d2bd6b1ffa5529bb3ac
line vty 3
password 7 49b76c098f3b0d2bd6b1ffa5529bb3ac
line vty 4
password 7 49b76c098f3b0d2bd6b1ffa5529bb3ac
--More--        line vty 5
password 7 49b76c098f3b0d2bd6b1ffa5529bb3ac
line vty 6
password 7 49b76c098f3b0d2bd6b1ffa5529bb3ac
line vty 7
password 7 49b76c098f3b0d2bd6b1ffa5529bb3ac
line vty 8
password 7 49b76c098f3b0d2bd6b1ffa5529bb3ac
line vty 9
password 7 49b76c098f3b0d2bd6b1ffa5529bb3ac
!
end
 
You need to give VLAN1 an ip address in your subnet range, not port 0/24...

actually you need to remove that ip addy from port 0/24 and give that to VLAN1 or VLAN10, which ever is your management VLAN.

------------------------------------
Dallas, Texas
Telecommunications Tech
CCVP, CCNA, Net+

CCNP in the works
 
I can't find anyway to setup VLAN1 with an ip address. I use the question mark and can't find a way to setup an ip address with a vlan.


Force10(conf-if-vl-1)#?
description Interface description
end Exit from configuration mode
exit Exit from interface configuration mode
mtu Configure interface MTU
name Configure vlan name
no Negate a command or set its defaults
show Show interface configuration information
Force10(conf-if-vl-1)#sh ?
config Show interface configuration
Force10(conf-if-vl-1)#sh config
!
interface Vlan 1
!untagged GigabitEthernet 0/2-23
 
Try, looks like you are just creating the layer 2 vlan with those commands.
conf t
interface vlan 1
ip address <mask>
 
you say that the Force 10 switch CLI is exactly like the Cisco CLI so perhaps you need to go under the interface vlan 1 and type in no switchport to switch it to a L3 interface.

I hate all Uppercase... I don't want my groups to seem angry at me all the time! =)
- ColdFlame (vbscript forum)
 
you probably also need a default gateway set to your router out to internet...or to next hop between this switch and there...I didn't see that setting in your show run...
 
try this example

Switch#vlan database
vlan 10
exit

config t
int vlan 10
ip address 192.168.1.2 255.255.255.0
no shut

ip default-gateway 192.168.1.1

show vlan id 1 <--see the ports assign to this vlan

switchport access vlan 10




[americanflag] Go Army!
Tek-TIP Member 19,650
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top