Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Brance Office can't browse the internet

Status
Not open for further replies.

jepoyako

IS-IT--Management
Sep 16, 2006
18
GB
I just linked two sites using cisco 2800 router and the link is now fine except the brance office can't browse the internet. Before, i link the two sites the main office got an ADSL and have their own dhcp/dns server windows 2003. The brance office use this dhcp server ( using IP helper in cisco). So basically, all the users in the main site can browse the internet coz their gateway is pointed to the ADSL where the brance office can't although the DNS from main site is use for the brance office. by the way I am using static route between the two cisco router. Please advice. Thanks
 
Post the configs.
Do ping tests.
Do tracert (traceoute on cisco) test
What can the branch office do?
 
The branch office use an IP Phones where the PABX is located in the main site. VOIP is working between sites just the internet.

Heres the config:

-------------Branch Office--------------------

interface GigabitEthernet0/0
ip address 10.3.0.1 255.255.255.0
ip helper-address 10.2.0.1
duplex auto
speed auto
!
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface Serial0/1/0
ip address 200.1.1.1 255.255.255.0
no fair-queue
!
ip route 10.2.0.0 255.255.255.0 200.1.1.2
!
ip http server

----------------Main Site-------------------

interface GigabitEthernet0/1
ip address 10.2.0.253 255.255.255.0
duplex auto
speed auto
!
interface Serial0/1/0
ip address 200.1.1.2 255.255.255.0
!
ip route 10.3.0.0 255.255.255.0 200.1.1.1
!
ip http server
 
add default routes to each site

branch
ip route 0.0.0.0 0.0.0.0 s0/1/0

main
ip route 0.0.0.0 0.0.0.0 10.3.0.x

the x is your your internet gateway
 
Also, check you internet gateway, it may need a route to your branch site. If it is a cisco router, here is the command.

ip route 10.3.0.0 255.255.255.0 10.2.0.253
 
No, its not a cisco. Its normal ADSL router e.g netgear, dlink. Do i need to create an ip route from the adsl router?
 
Hi jdeisenm,


is the Ip route correct in the main site? you said 10.3.0.x or 10.2.0.x rather?

"
branch
ip route 0.0.0.0 0.0.0.0 s0/1/0

main
ip route 0.0.0.0 0.0.0.0 10.3.0.x

the x is your your internet gateway"
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top