BP250 ISDN2 P2P/PMP setting 1

[Ekster]

Hi,

I hope some kind person can help. I have a customer who is running ISDN2 lines on a BP250 BTU-B2 card and the lines have stopped working. I suspect BT may have changed the lines from Point-to-Multipoint to Point-to-Point. I can't for the life of me find where to change the system setting for this.

Thanks in advance.


+++ Divide By Cucumber Error. Please Reinstall Universe And Reboot +++

 

[motard]

Hi Ekster.
Command 1919 - TEI Value --> 0 ( Point to Point )
Hope it helps

 

[Ekster]

Life saver!!

Damn BT changed the line from P2P to PMP don't know why, must have done a software rebuild in the exchange and its defaulted to the P2P setting.

Thanks for the help have a star

+++ Divide By Cucumber Error. Please Reinstall Universe And Reboot +++

 

[batkotivalio]

What was your previous value on 1919 parameter?
My initial value is "0"...

 

[Ekster]

Initial value for 1919 on this system was set to "--" for each instance, I assume that means "auto" TEI therefore Point to Multipoint.


+++ Divide By Cucumber Error. Please Reinstall Universe And Reboot +++