BP-250 SEND MY DDI NUMBER THROUGHT OTHER PBX

[CYM3160]

Hi, I have two Ericsson BP-250 PBX, connected by QSIG PRIMARY.

Only the master PBX has trunks connected for make outgoing calls(BRI trunks). When I make a call from an extension that belongs to the secondary pbx, I can not send, the number that i want (I only can send the number of header (the principal number of the ISDN).

Can I make something for send the DDI number from one extension connected in the secondary pbx? ?, because I can not configure DDI number in the primary PBX through the 2260 table.


Many thaks, Grego.

 

[xs650]

have you set 1038=2 in the main system for the BRI trunks?

 

[CYM3160]

Yes, i set 1038=2 in the main system for the BRI TRUNKS, but where can I make the construction of the DDI number that i want send......

For example, i´ve the extensión 2671 in the secondary pbx, and this extensión need send the DDI number 943 31 71 06, i cant use the table 2260 in the main PBX (because the extensión is not a valid extensión for the main PBX), i only can use the table 2260 in the secondary PBX. In the secondary PBX i use the command 2220 = 943 and the 2260 = 31 71 06. The command 0169 is set to yes for the extensión number 2671, but this extensión can´t send the DDI number to the public network.