bp 250 analog trunk (v-sat line)

[teenu3]

Hi all,

I need to connect 4 v-sat telephone line as analog line trunk to btu a in bp250.
i did connect it as normal pstn analog line but no out going . incomming is there .
i tried to change diffrent parametres but no luck yet.

any advice from the experts who connected v-sat line to bp 250.

Regards

 

[woolwich]

Hi Teenu3

can you post up the parameters pls

Cheers

 

[teenu3]

hi woolwich,

1023--65:trunk to public exchange
1014--yes
1201--01:standerd simulate analog telepone
1406- 60
1407--5
1408--60
1409--60
1410---60
1417--11
1420--0
1421--0
1422---0
1013--yes
1416---1
1423--0
1431--yes
1109--yes
1039--0
1803--0
1804---0 not in use
1017---yes
1411--8
1412---8
1413---30
1419--10
1301---1 dtmf
1302---1 dtmf
1308--yes
1309--yes
1311--none
1317--none
1401---4
1402--30
1403--8
1404--2
1414---08:800
1415---08:800
1303--0
1304---0:10hz
1305--0:40/60
1306---10:800
1313---0;standerd dtmf
1312---00:staderd r2
1316---yes
1315--15
1502--none
1503--0
1405---0
1418---6
1601---28.0
1602---28
1603- 20
1604--35
1605--10
1606--22
all athor valus are default

regards

 

[teenu3]

Hi woolwich.

pla see the PARAMETERS.

REGARDS