Mar 12, 2012 #1 sammy0 Technical User Mar 12, 2012 17 AE I have a boss/secretary configuration on two phones using MNS. The issue is that secretary can hear the ringing on her phone when someone calls the boss extension but cannot see the calling number. System is MX-ONE 4.1_SP3
I have a boss/secretary configuration on two phones using MNS. The issue is that secretary can hear the ringing on her phone when someone calls the boss extension but cannot see the calling number. System is MX-ONE 4.1_SP3
Mar 17, 2012 #2 tamizvendan Technical User Nov 12, 2011 63 IN There is an ASPAP value that enables the caller ID when the MNS rings. Upvote 0 Downvote
Mar 17, 2012 #3 batkotivalio IS-IT--Management Mar 22, 2011 27 could you share this parameter? Upvote 0 Downvote
Mar 17, 2012 Thread starter #4 sammy0 Technical User Mar 12, 2012 17 AE I believe it's PARNUM=197,PARVAL=2 it enables CID number to be shown on the DTS display. will confirm this tomorrow. Upvote 0 Downvote
I believe it's PARNUM=197,PARVAL=2 it enables CID number to be shown on the DTS display. will confirm this tomorrow.
Mar 17, 2012 #5 tamizvendan Technical User Nov 12, 2011 63 IN PARNUM=159 Display of calling party's name/number on multiple represented extensions set it as PARNUM=159,PARVAL=1; Upvote 0 Downvote
PARNUM=159 Display of calling party's name/number on multiple represented extensions set it as PARNUM=159,PARVAL=1;
Mar 17, 2012 Thread starter #6 sammy0 Technical User Mar 12, 2012 17 AE Yes sir, you are absolutely right. I can't believe I missed that. Much thanks. Upvote 0 Downvote