bootdisk for network card Intel pro/100 ve?

[SmbNorway]

Hello!

I have a laptop with the network card Intel pro/100 ve and I want to use ghost to make a image. I cannot make the boot disk for this networkcard, do anyone have the dos driver or a bootdisk that works for this card?

smb

 

[Harri]

Hello,

I don't like to make things harder for you but you will probably also need the PCMCIA card services for DOS for the sockets in your laptop as well so that the Network card driver can detect the card is there.

If the card is built-in to the laptop (i.e. not a PCMCIA card) then the laptop manufacturer would be able to supply DOS drivers for the network card and the Card Services.

Otherwise there should be a Part Number on the card and you can use Intel's website at the following address to get the drivers:-

http://support.intel.com/support/network/adapter/pro100/21397a.htm

 

[wolluf]

http://downloadfinder.intel.com/scr...C,UTL&ProductID=407&OSFullName=DOS&submit=Go!

 

[SmbNorway]

Hello, again!

I found a bootdisk on the net that works with this card, Barts bootdisk on the website

http://www.nu2.nu.

Obviously the Intel 100 driver for PCI cards supports this card as well.

smb

 

[wolluf]

good site