BOGEN PCM200C PAGING SYSTEM ON CS1000E 5.0

[coameno]

I have a CS1000E 5.0 and programmed a WATS port for paging BOGEN PCM200C and it access the port but when you enter any key after the beeps it disconnects the trunk. It worked as a wats on a option11C,any sugguestions?

 

[trvlr1]

Try building as PAG (paging) trunk instead.

 

[Sean5395]

You may need to build it as a cot so it will pass dtmf.

 

[GHTROUT]

Set the LD16 Trunk Route Data Block with MANO=YES and your problems might be solved.

--
Nortel Resources at GHTROUT.com
--

 

[PERRYPJ]

WATS or COT is the only way to pass DTMF

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[coameno]

The MANO worked, thanks guys.