DisasterMaster
Technical User
I have a Cisco VG port connected to a BOGEN PCM2000 paging system.
Trying to find root cause to the following intermittent problem.
99% of the time the system works as it should. Dial access code, hear a beep, dial zone number, hear a beep and then make announcement.
On occasion though, I can dial the access code to reach the paging system and hear a beep, dial a zone number and then hear 3 beeps at which point I'm unable to make an announcement.
This issue will repeat until I cycle the power on the Bogen CPU.
After that, paging returns to normal operation.
Has anyone experienced this or know of a solution?
Trying to find root cause to the following intermittent problem.
99% of the time the system works as it should. Dial access code, hear a beep, dial zone number, hear a beep and then make announcement.
On occasion though, I can dial the access code to reach the paging system and hear a beep, dial a zone number and then hear 3 beeps at which point I'm unable to make an announcement.
This issue will repeat until I cycle the power on the Bogen CPU.
After that, paging returns to normal operation.
Has anyone experienced this or know of a solution?