Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BOGEN 3 Beeps

Status
Not open for further replies.

DisasterMaster

Technical User
Feb 2, 2012
223
US
I have a Cisco VG port connected to a BOGEN PCM2000 paging system.
Trying to find root cause to the following intermittent problem.
99% of the time the system works as it should. Dial access code, hear a beep, dial zone number, hear a beep and then make announcement.
On occasion though, I can dial the access code to reach the paging system and hear a beep, dial a zone number and then hear 3 beeps at which point I'm unable to make an announcement.
This issue will repeat until I cycle the power on the Bogen CPU.
After that, paging returns to normal operation.
Has anyone experienced this or know of a solution?
 
hmmm, guess no one seen this before. If I find a solution, I will post it here for future reference.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top