Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Blurry print

Status
Not open for further replies.
68chick

68chick

MIS
Jan 2, 2003
3
CA
I tried a search....but it's down and the HP site sucks!

HP4050N is printing really blurry jobs. I already did the cleaning page, etc.

Could it be the toner? It's brand new!
Thanks, in advance.
 
Sort by date Sort by votes
If the machine is in a dusty enviroment the mirrors on the laser unit could be dirty and will cause light distorted print. Good Luck CW
 
Upvote 0 Downvote
But I would try a different toner first. They do come defective at times.
 
Upvote 0 Downvote
Blur print can sometimes be caused by a scanner fault, however this should have given an error code?
 
Upvote 0 Downvote
First thing I would do is try the test pages from the printer, just to make sure that h=it is a hardware fault My advice is limited to my personal opinion, and the information I have been provided with. Paul Melarkey
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

vgulielmus
  • Question
Shared printer connected via USB
Replies
4
Views
715
vgulielmus
vgulielmus
S
  • Question
Sharp BP-50C55 printer User Authentication box
Replies
0
Views
316
SMS1295
S
R
  • Question
2 users in the same office using 2 different printers both have"GET /eSCL/ScannerStatus HTTP/1.1 Host: localhost:" printed on the top of every paper t
Replies
1
Views
291
DrB0b
DrB0b
tom_noods
  • Locked
  • Question
HP PageWide 577 - Large missing sections on prints
Replies
2
Views
291
tom_noods
tom_noods
RGarcia87
  • Locked
  • Question
Print mapping non domain computers
Replies
2
Views
160
Printer Repair
Printer Repair

Part and Inventory Search

Sponsor

Back
Top