Blocking internal dialing on IPO 1

[maalbi]

A system has two internal extension ranges, e.g. 2XX and 5XX.
Is there a way that you can bar the 2XX users dialling the 5XX users?
I have tried various user and system short codes, but the IPO always matches the extension first before going to the short codes.

 

[telecomtekperson]

Getting into supported/not supported discussions....

No, it is not supported (as far as i can tell).

BUT, if you have a dial 9 or any dial access code, it does work to create a short code of:
5XX
Barred
Line group 0

Put that in the user short codes...

You need the dial access code though, remove that, and the solution breaks.

 

[holdmusic34]

Giggity.

To hear the word 'No' in German, press 9.

 

[derfloh]

I guess this will not work because any mathing users or groups are found befor any short code is processed.

Need some help with IP Office?

https://www.fwilke.com/home

CLI based cale blocking:

https://blog.fwilke.com/ip-office-block-calls-from-specific-cli/

SCN fallback over PSTN:

https://blog.fwilke.com/ip-office-scn-fallback/

 

[telecomtekperson]

It is working for me...

 

[intrigrant]

It depends on the system dial delay time and dial count, type of phones and the intelligence of the users for it to work.
Somehow.
Basically it does work only partially.