Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

blocking internal caller id 2

Status
Not open for further replies.
Sep 21, 2007
109
CA
hi guys there are two IT guys that need their caller id to be blocked internally so people won't bug them and make them use a dn specified for that ... i tried cls clba but it did not work could you please help me

i have an option 61c release 23

thanks

georges392
 
Calling Name and Number blocking for internal calls became available with RLS 21. You can check your CLS on the phones.
NAMA - Name allowed is the default.
NAMD - Name denied.
DDGA - DN display on other set Allowed is the default.
DDGD - DN display on other set denied.
 
I don't have any books with me, but i think the correct class of service (CLS) to turn it off is CNID.
 
CNIA/CNID has to do with messaging information, hospitality use.
BLOCK CLID
CLS CLBA will have the call show as Unknown.
DNDD NDD
dialed name display denied or no digit display

No internal CLID = DDGD
 
guys the display shows XXXX how can i make it blank.. or instead lets say that i blocked the display of dn'S 501,502,503,......but they want instead to have their display show dn 500 which is the number of the secretary of the it department can it be done
 
Why not put a MCN Key 500 on those 3 phones and have them use that key to make internal calls and put a MCR key on the dept secretary, she's the only one that will hear it ring.




This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top