blocking cli on generic

[happyhammer66]

i'm looking to prevent the name/numbers from a few generic extn's being sent when they make an outgoing call (internal). Looks like i have to created a couple of Common Service Profiles with the NPRES =010. Is there an easier way such as the customer can switch it on and off by themselves?

BC10, generic extensions.

thanks

hammer.

 

[mdfan]

Do you mean from the telephone instrument itself ?

I don't think this can be done from the instrument. Alcatel phones can do this , would have been nice feature for MD110 as well.
Patcher ?

 

[happyhammer66]

the generic phone logs on to a normal DTS phone. I changed the additional category on this DTS phone with extn mgr which sent the following:

KSCACIR=XXXXX,ADC=00010000000;

This i thought would block the callers number being displayed. User reports no change(number is displayed) but i'm getting them to log out and back in again to re-check.

Should the ADC parameter above work?

thanks,

bill

 

[happyhammer66]

The ADC only works for the hardwired phone. I created a new Common Service Profile where i changed NPRES =010. This works and the called user gets a message that the user wants to change to something like 'private' Anyone info on how to change this message and is it global?

thanks,

hammer

 

[happyhammer66]

finding it hard to see where this is set.
GETSP:STRNO=MIS11 SHOWS "Unlisted" but thats not what i'm getting. I'm getting a text string that relates to a particular group or site but that message defeats the object or barring the CLI info from being displayed.

Anyone with suggestions?