Blockage Study Report

[wildcard100001]

What do the blockage numbers indicate? In CMS we are getting reports that indicate dequeued calls. Any relation? Is this a resource issue? What does it mean?

See below:

BLOCKAGE STUDY REPORT

Meas Time Division Multiplexed(TDM) Port Network(PN) Link
PN Hour Usage Peg Peak Blockage Time-slots Usage Peg Peak Blockage

1 1400 16481 24723 477 949 766 13765 17423 416 0
2 1300 5886 5276 193 0 766 4749 2878 160 0
3 1400 15496 26572 476 28 766 15034 19493 463 0
4 1300 13090 22911 406 0 766 10426 16497 348 0
5 1400 3107 4371 121 0 766 3028 3406 120 0
6 1400 9221 12255 281 0 766 2292 2004 85 0
7 1200 133 178 8 0 766 133 178 8 0
8 1100 143 96 12 0 766 142 85 12 0
9 1200 61 94 8 0 766 61 94 8 0
10 1200 9018 4576 312 0 766 7559 2262 254 0
11 1200 15 19 8 0 766 15 19 8 0
12 1400 6787 5034 224 0 766 6445 3190 213 0


Thanks,

Wildcard

 

[rod1]

This only means that your time slots in Port network 1 and 3 are exceeding the maximum CCS usage which is only 17,388 CCS. In your case, your TDM USage is almost near the maximum (16,481 and 15,496) which causes time slot request to be denied when it approaches the maximum CCS. You must need to relocate some of your resources in Port network 1 and 3 to other Port network.