Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Block specific number

Status
Not open for further replies.

Trevatwork

IS-IT--Management
Nov 30, 2006
309
Hi all

Option 11

I have been searching here for a way to block a couple of numbers calling in.

From what i have read it is impossible to block specific numbers from the switch itself. I need to have the call handled by symposium to do this.

Is this true?

Thanks, Trevor
 
Yes, Symposium, or old CCR, so you can have a CLID script of where to send it, force disconnect, etc.
 
This is what I put in my master script in Symposium....

IF CLID = number_blocked
THEN DISCONNECT
END IF

So, under the CLID type of variable, name the variable and put in the numbers you want to block for the values.

Matt
Forex Capital Markets
CS 1000E VoIP/Symposium Admin
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top