Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

block inbound calls from certain exchange

Status
Not open for further replies.

letman2

Technical User
Mar 15, 2007
209
US
We are getting incoming calls from people spoofing our numbers. We own all 10000 line. We would like to block all ten thousand lines. If people in our system dial all ten digits we strip the first five digits to keep it in the system. we are on CM 6.3
 
I just told you we have FULL dadmin rights and we are a platinum business partner
 
The only thing I can think of is maybe to get this command we would have to enable a special feature on the system parameters field. Gotta go have a good weekend.
 
Are your DID's in full ranges or do you have sporadic ones? It would be pretty easy to consolidate your vector routing to go to a busy signal if for instance you enter in the following:
Step 1:goto step 99 if ani = 123-456-????
Step 2: goto step 99 if ani = 124-456-????
step 3: stop


step 99: busy

 
I am on Cm6.3 and can not get that command. I looked at special applications Sa8886 but not sure how that works.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top