Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Block Company Name on Outbound Calls

Status
Not open for further replies.

trilogy8

Technical User
Jan 26, 2017
413
US
My voice PRI's all pass individual DID and company name on outbound calls. We recently were requested to start blocking our company name on our outbound calls. Is there a way on the PBX... TG form or wherever that I can control that w/o having to deal with the carrier?
 
The carrier registers the names to numbers on a shared data base. You can block numbers or ask the to remove the registration.
 
Page 3 of your trunk group if ISDN "send name N"

ACSS (UC/SBCE/SM/SME)

Not that they mean a thing anymore , get a brain dump pass the test crash the system.
 
@Montyzummer -- tried flagging send name to N and the name still appeared at the far end.
 
This is controlled by your line provider as already stated
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top