Block 411 calls from 61C? 1

[Brutus82]

NEC Tech here still learning Nortel. I was just asked if we can block 411 calls on our 61C. I know it's possible becuase I just don't know how yet. I knew how to on NEC switches but being new to Nortel I'd rather ask for help insted of take chances so soon... (Hospital) help

Thanks in advance

 

[GHTROUT]

You can block it altogether or limit it to certain NCOS users.

You also have to consider blocking 555-1212 and NPA-555-1212

If you just want to stop 411, look for it in LD 90, then delete it

LD 90
REQ PRT
CUST 0
FEAT NET
TRANS AC1
TYPE SPN
SPN 411

If that does not produce the 411 entry, just print the whole thing to a text file and do a search on "411" - like this

LD 90
REQ PRT
CUST 0
FEAT NET
TRANS AC1
TYPE ALL

Then to delete 411

LD 90
REQ OUT
CUST 0
FEAT NET
TRANS AC1
TYPE SPN
SPN 411



~~~
[small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]

 

[Brutus82]

Thank you ghtrout for your help, I'll be doing this first thing Monday morning. This learning curve is tough, it's hard to drain NEC from my brain! hehe

Thanks Again

 

[Brutus82]

Ok I did find 411, here is what I have based on your instructions:

REQ prt
CUST 0
FEAT net
TRAN AC1
TYPE SPN

SPN 411

SPN 411
FLEN 3
ITOH YES
RLI 12
SDRR NONE
ITEI NONE

My question is, how do I delete the 411?

Thanks

 

[RyanEOD]

At the REQ type OUT then:

CUST 0
FEAT NET
TRANS AC1
TYPE SPN
SPN 411

and enter down, then do a test call!

 

[Brutus82]

My gosh you are as fast as you are good! hehe Thank you RyanEOD

 

[Brutus82]

Uh... er... um... just looked back at GHTROUT's post above and saw that he already included the answer on deleting. My bad, sorry guys

 

[RyanEOD]

No worries. I often over look things too when posting on here. When you are confused and lost it doesn't always make sense.

 

[johnpoole]

depending on the cust you may want to deny all ld 411 as well.. since you just blocked local

FEAT net
TRAN ac1
TYPE npa

NPA  1213

NPA  1213
RLI  2
DENY 555

SDRR DENY CODES = 1
ITEI NONE

that requires a chg prt npa, or a script when you do the change at the sdrr enther deny return 555 return back to npa..

john poole
bellsouth business
columbia,sc

 

[telemarksman]

Brutus can you email me directly about an NEC problem I have? Thanks telesystems@san.rr.com