Blank page printing

[hassellhorse]

I have a report with a subreport entered in the report footer that prints based on specific details criteria. I have formulas in my page header; report header; report footer to suppress my original header from printing on my subreport, however, now I am constantly getting a blank page both when the subreport should print and when it shouldn't. I have conditionally formatted all sections to suppress blank sections and formatted the subreport to suppress printing if no records. When troubleshooting, I noticed as soon as I "unsuppressed" my report footer, I started getting the secondary page. CAN SOMEBODY PLEASE HELP ME!!!!

 

[kwalters135]

In addition to conditionally suppressing sections, make sure to suppress sections that are rolled up to where they aren't visible. Even sections that aren't in use and have been compressed to where you can't see them in design view can cause this problem if they aren't suppressed.

 

[hassellhorse]

There are no sections that are rolled up or not visible. Do you have any other suggestions?

 

[kwalters135]

I had the same problem with a report and that fixed my instance.

The only other items I can think of are ones that you have probably already tried - make sure you don't have the "new page after" option checked for a section, make sure there isn't extra white space near the bottom of a section that could be causing the problem, and if you use the "print at bottom of page" option for a section try turning it off and see what happens.