Hey everyone. We've got a BladeCenter full of HS20's. I'm trying to get into the MMU web management interface, but the username/password has been changed from the default USERID/PASSW0RD. We purchased this off-lease and don't know the original owners. I found the button to reset the IP address (which appeared to work), is there a way to reset this thing to factory defaults? I popped it open, only to find some unlabeled jumppers. Any tips? Thanks!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BladeCenter MMU Reset
- Thread starter jrapp
- Start date
See
Mike
"Whenever I dwell for any length of time on my own shortcomings, they gradually begin to seem mild, harmless, rather engaging little things, not at all like the staring defects in other people's characters."
Mike
"Whenever I dwell for any length of time on my own shortcomings, they gradually begin to seem mild, harmless, rather engaging little things, not at all like the staring defects in other people's characters."
- Thread starter
- #3
Thats the way it goes sometimes..... ;-)
Mike
"Whenever I dwell for any length of time on my own shortcomings, they gradually begin to seem mild, harmless, rather engaging little things, not at all like the staring defects in other people's characters."
Mike
"Whenever I dwell for any length of time on my own shortcomings, they gradually begin to seem mild, harmless, rather engaging little things, not at all like the staring defects in other people's characters."
- Status
Similar threads
