Bix Block Designator Strip Labels

[qwzx]

I am looking for a Word template or other software to print custom labels for the Bix 2 and 10 mount label strips. Thanks

 

[MarvO1]

I use Excel.
Just create your column widths and row heights to match the sizes on the BIX.
You can also cut down the clear plastic lable holders from 110 blocks to snap into the BIX.

MarvO said it

 

[DToolsDesigner]

If you know the measurements of the BIX desi-strips you can set Word up using the labels function for any label you might need.
Then get a good paper cutter, the kind that rolls and cuts, not the chopping type.
You can set it up any way you want then.

Richard S. Anderson, RCDD

http://www.servamatic.net

 

[JBeav]

You should be able to find "free" software downloads from the NORDX site. If you don't by their program, you can create but you won't be able to save lables.

http://www.nordx.com/public/htmen/IBDN_LabelFlex_System.htm

Jeff

 

[qwzx]

Thanks!!