Bit of QoS help.

[dozier]

hello. i've got a point to point OC-3 link between two cisco 7204s that i've implemented QoS over, but I need some verification that my configuration is doing what i intended it to.

class-map match-all DMZ_in
 match any 
class-map match-all edge3000_out
 match qos-group 1
class-map match-any edge3000_in
 match any 
class-map match-all DMZ_out
 match qos-group 2
!
!
policy-map oc3_out
 class edge3000_out
  shape peak 135000000
 class DMZ_out
  bandwidth remaining percent 100
policy-map mark_DMZ
 class DMZ_in
  set qos-group 2
policy-map mark_edge3000
 class edge3000_in
  set qos-group 1
!
!
interface GigabitEthernet0/1.20
 service-policy input mark_DMZ
!
interface GigabitEthernet0/2
 service-policy input mark_edge3000
!         
interface GigabitEthernet0/3
 service-policy input mark_edge3000
!
interface POS1/0
 service-policy output oc3_out

i intend the edge3000_out class to get 135Mbps, no more, no less, and have priority over any other traffic. the DMZ_out class can have all the remaining bandwidth available, and also be prioritized over unclassified traffic. have i set this up correctly?

thanks.