BIT imaging tool

[unclegeoff]

Hi All
I am trying to image a new drive with a 4.0 GA set of imaging disks. I have Ghost 15 and I kind of know that I need this command
ghost -clone,MODE=load,SRC=R:\40GA_BIT.GHO,DST=1,SZEE -ntchkdsk -sure -auto
but I do not know how to use it. Has anyone got any ideas.

 

[pkellow]

why not use the bit imaging application cd. If you are in the uk, I can maybe create one for you if you supply the drive and a beer.

 

[unclegeoff]

As I understand it to use the BIT imaging tool you need a code from Avaya. I am trying to bypass this system and image several harddrives.

 

[Firebird Scrambler]

Most of use Acronis. I did 8 BCM 4.0 images last Friday. I take me on average 40 minutes to do a full factory day one image.

http://www.ghtrout.com/bcm/Replacing_a_Hard_Disk_on_a_BCM_50_System.zip

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[unclegeoff]

Thanks David but I don't have a drive to copy from only thr 4.0 GA imaging CD's

 

[Firebird Scrambler]

The acronis Image I have is 4.9 Gigs.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.