Hi, I am trying to run a BIOS update on my Compaq 615 laptop (first time) and the main HP download gives me the instructions below which says that this is used with the SSM program (an HP tool for deploying over a network)- this is the only BIOS update I can find for the laptop, can I still just run this BIOS update like a normal Windows program from the laptop WITHOUT the SSM program? Many thanks.
TITLE: ROM Image for HP Notebook System BIOS (68GVV) Remote ROM Flash - SSM compliant
VERSION: F.0C
DESCRIPTION:
This package creates files that contain a binary image for the System BIOS (ROM) for the listed notebook models with a 68GVV Family ROM. This package is used to flash the System ROM on target notebooks in a network. It requires
System Software Manager (SSM).
To determine the ROM family and ROM date, press F10 on the target notebook during startup to run the Setup Utility, and then view File/System Information.
PURPOSE: Routine
SOFTPAQ NUMBER: SP46875
EFFECTIVE DATE: 23 November 2009
CATEGORY: BIOS
SSM SUPPORTED: Yes
PREREQUISITES:
System Software Manager
HOW TO USE:
NOTE: To flash the System BIOS on a target notebook in a network, the
System BIOS image must be used with SSM.
1. Download the SoftPaq .EXE file to a temporary, empty directory on your
hard drive.
2. Copy the SoftPaq to the file store.
Copyright (c) 2009 Hewlett-Packard Development Company, L.P.
TITLE: ROM Image for HP Notebook System BIOS (68GVV) Remote ROM Flash - SSM compliant
VERSION: F.0C
DESCRIPTION:
This package creates files that contain a binary image for the System BIOS (ROM) for the listed notebook models with a 68GVV Family ROM. This package is used to flash the System ROM on target notebooks in a network. It requires
System Software Manager (SSM).
To determine the ROM family and ROM date, press F10 on the target notebook during startup to run the Setup Utility, and then view File/System Information.
PURPOSE: Routine
SOFTPAQ NUMBER: SP46875
EFFECTIVE DATE: 23 November 2009
CATEGORY: BIOS
SSM SUPPORTED: Yes
PREREQUISITES:
System Software Manager
HOW TO USE:
NOTE: To flash the System BIOS on a target notebook in a network, the
System BIOS image must be used with SSM.
1. Download the SoftPaq .EXE file to a temporary, empty directory on your
hard drive.
2. Copy the SoftPaq to the file store.
Copyright (c) 2009 Hewlett-Packard Development Company, L.P.