System: HP Kayak XA
O/S: ME
I lost all my devices after (perm) delete _RESTORE folder and turned off the system RESTORE.
- Primary IDE controller (Dual fifo)
- Secondary IDE controller (Dual fifo)
- Standard Floppy Disk Controller
- Adaptec AHA-294X/AIC-78XX PCI SCSI Controller
- Printer Port
- Iomega Click! Parallel Port Interface
- Iomega Parallel Port Zip Interface
all of them has "Code 10" error (printer port has code 24 error) in device manager.
I am guessing it may be fixable in the BIOS but don't know how. My boot device id is 4.
Also, during boot I can see the hardwares,CD ROMs and Adaptec PCI SCSI card, were detected. And after trying to reinstall all the dirver files. The device manager seems to know where they are via automatic search and even reported current driver file is better than the one I downloaded from HP support web site....)
O/S: ME
I lost all my devices after (perm) delete _RESTORE folder and turned off the system RESTORE.
- Primary IDE controller (Dual fifo)
- Secondary IDE controller (Dual fifo)
- Standard Floppy Disk Controller
- Adaptec AHA-294X/AIC-78XX PCI SCSI Controller
- Printer Port
- Iomega Click! Parallel Port Interface
- Iomega Parallel Port Zip Interface
all of them has "Code 10" error (printer port has code 24 error) in device manager.
I am guessing it may be fixable in the BIOS but don't know how. My boot device id is 4.
Also, during boot I can see the hardwares,CD ROMs and Adaptec PCI SCSI card, were detected. And after trying to reinstall all the dirver files. The device manager seems to know where they are via automatic search and even reported current driver file is better than the one I downloaded from HP support web site....)